Fully automatic PLC control machine

Pneumatic cylinders for all actions

No need for manual hammering for clipping at both ends

Ensuring safety, thanks to safetylight curtain

Quick and easy pre-programmable for different make of card’s flats

Carriage movement guides by LM guide for rigidity

Top pressing and clipping to the flat is simultaneous operation

ensures highest precision of clipping with respect to straightness of the flat bars

Also available for Rieter C-70 Card flat and Trutzchler TC 11 card flat, (PFC-4-60)

Motor 1.1 kw

All fully automatic PLC control machine Flat clamping unit, pre-bending and form rolling unit is pneumatically control.

No manual clipping is required at end of top.

Highest precision with respect to straightness of the flat bar in the clipping process.

Old Top Tear of attachment - for any one make of flat can be supplying with machine PFC-3

For milling worn out flat ends, bring the original accuracy of Heel & Toe.

With fixed cam arrangement.

Novel arrangement of fix cam for accurate and easy Heel & Toe Milling.

Machine should be supplied with one pair of cam suitable for one make of card.

Control bar with supports and dial indicator.

The FEM-2 will mill flats types of 40” cards (60” version on request)

Two speed gear box to change RPM of cutter.

Clamping of flat by pneumatically operated clamp.

Pair of cam for any make of card.

Automatic Flate Grinding Machine AFG-3

Abailable in two models for flat length of 37-40 & 37-60

preces granding of one or three flates simultaneously

choice of grinding media- ceramic roller of emery fillet

centeralised lubrication system

Suitable for mounting wire on rollers upto 1600 mm Length

Can be used to mount wire on Licker in, Feed Roller, Redirecting Roller, Stripping Fillet, Blow Room Beaters , etc

Traversing assembly with bearing guiding unit & wire Tension Indicator

Drive unit driven by A.C geared motor, Speed Control by Variable frequency Drive.

Having Liner Drive main unit

A.C. variable Driver

Grinding stone Force is, on Gravity Froce

Bracket for holding one any one make of card

Extra bracked for other make of card will be at extra cost

Also available for Tc 11 & Rieter c-70 Cards

For unwinding of used wire from cylinder and doffer

Motor 0.8 kw

Save the time because flats from the machine need not to be removed.

Easy to install on card.

Drive-via motor assembly or via belt from card cylinder drive depending on the type of the machine.

Holding fixture to be provided by card manufacturer

The OCFG-1 will grinding flat from all types of 40” card (60” version on request).

Full width on Card Grinding Roller for Rieter C-60 Card, mounted with Ceramic Stones.

Also available for 40” Card.

Dressing bed for stone dressing of On Card Flat Grinder for Rieter C-60 Card

Heavy duty butt welder suitable for heavy inter locking wire of blow room & also for matalic wire for card.

1.5 kW for card wires

• 3 kW for card wires & all heavy duty wires.